How long does it take you to reach Katy from Spring?

Typically 50–65 min via Beltway 8 and the Grand Parkway. These are typical drive times based on midday traffic — peak hours can push it longer.

Which Katy facilities do you already service?

Oilfield-services packaging shops, metal-building manufacturers, and machine shops across Grand Pkwy and I-10W. Specific customer references available on request (with their permission).

Do you do emergency calls in Katy?

Yes — same-day when possible. If a tech is already in West Houston we can often route through Katy the same shift.

Is Katy inside your primary service area?

Yes. Katy sits well inside the 100-mile primary radius from our Spring shop.

Who runs Saw Service 3G — and what does the "3G" mean?

Kaylen (owner) and Mason (service lead) run the company day-to-day. "3G" stands for the third generation of the family business — Kaylen's father, known across Greater Houston metals as "DoAll Dave," serviced most of the saws our customers still run today. Kaylen joined in 2019 and took over in 2024.

How long have you been servicing industrial band saws?

25 years across three generations of the same family. The business started in 2001 and has been on Greater Houston metals shop floors ever since.

Are you an authorized dealer for any band saw brand?

Yes — Saw Service 3G is an authorized Hyd-Mech dealer. We also routinely service Marvel, HEM Saw, Amada, Behringer, Continental, Tsune, Nishijimax, Spartan, and many more.

Do you actually come to our facility, or do we ship the saw to you?

We come to you. Saw Service 3G is a fully mobile, on-site operation based in Spring, TX (north Greater Houston). We work directly on your floor, anywhere within a 100-mile primary radius — and we'll travel farther for the right customer.

Do you service industrial / metal band saws or woodworking band saws?

Industrial and metal band saws only — horizontal and vertical metal-cutting saws used in fab shops, machine shops, steel service centers, CNC shops, and tube & pipe yards. We don't service woodworking band saws.

Which band saw brands do you service?

Hyd-Mech (authorized dealer), Marvel, HEM Saw, Amada, Behringer, Continental, Tsune, Nishijimax, Spartan, and many more. After 25 years across the industry, if it's an industrial band saw, we've likely worked on it.

Can you handle emergency or urgent breakdowns?

Yes. Most emergency calls get a tech on-site within 72 hours, often sooner for Greater Houston customers we already work with. Call (281) 704-5589 — the faster we know, the faster we roll. Time-and-a-half applies for evening and weekend hours.

How do you price band saw repair?

Hourly with a 2–3 hour minimum (depending on location), plus travel — calculated from our shop in Spring, TX, out to your facility and back. We quote up front and bill after the job is verified done. No surprises.

What are your payment terms?

Net 30 with ACH or check. We don't currently accept credit cards. W-9 available on request.

Do you handle anchoring and relocations, or just repair?

All of it. We anchor band saws, disassemble and relocate machines between sites or plants, and handle every step of mechanical, hydraulic, and electrical work in between. We don't sell or install new saws (Hyd-Mech excepted, as authorized dealer) — we set yours up to run, keep it running, and move it when you need to.

Can you fix blade tracking, drive system, and hydraulic issues on-site?

Yes. Blade tracking, drive systems, hydraulics, controls, sensors, and electrical work — diagnosed and repaired at your facility. We bring the tools and 25 years of experience; you keep your floor space.

Do you offer preventive maintenance programs?

Yes. We build scheduled PM programs around your duty cycle so wear gets caught before it becomes downtime — tracked and reported each visit.

What cities and counties do you serve out of Spring / Greater Houston?

Our primary service radius is 100 miles from our Spring, TX shop — that covers Harris, Fort Bend, Brazoria, Galveston, Montgomery, Liberty, and Walker counties. We also serve customers across Louisiana, Oklahoma, Arkansas, New Mexico, and Mississippi for larger jobs and existing accounts.

Yes — general liability insurance is available up to $1–2 million if a customer's facility requires it on the certificate of insurance.

Service Area · Katy, TX

Industrial Band Saw RepairKaty, Texas

Factory-Authorized Hyd-Mech Dealer

Mobile industrial band saw repair from our Spring, TX shop into Katy, Texas. Drive systems, hydraulics, controls, blade tracking, calibration, and PM — billed only after the saw cuts square again. Authorized Hyd-Mech dealer.

Call (281) 704-5589

Request a Quote

Coverage

Industrial saws we service in Katy.

Authorized Hyd-Mech dealer plus on-site service for every other industrial brand running on Katy-area floors. Every system on the saw, diagnosed and repaired on your floor.

Hyd-Mech
HEM Saw
Marvel
Amada
Behringer
Continental
Tsune
Nishijimax
Spartan
+ many more

Mechanical

Guide arms, blade guides, drive belts, tensioners, bearings, chip brushes. Set-up restored to factory geometry so the cut is square again.

Hydraulic

Power-vise, blade-tension, down-feed, and clamp circuits. Cylinder, hose, valve, and pump diagnosis and replacement on the floor.

Electrical & Controls

Drives, motor starters, contactors, limit switches, prox sensors, PLC inputs, blade-break detection. Wiring sanity-checked end-to-end.

Blade Tracking & Tension

Tracking arms, tension gauge calibration, wheel alignment. Stops the blade from wandering or fatiguing prematurely.

Coolant & Chip Management

Coolant pump, lines, nozzles, mix ratio, chip brush, and chip-conveyor service. Cooler blades cut faster and last longer.

Calibration & Alignment

Head/vise squareness, blade-to-vise relationship, miter angle reset. Verified on a test cut before we leave.

Hyd-Mech owner? See the authorized-dealer service page for the full Hyd-Mech model list and repair scope.

Drive time & dispatch

From Spring to Katy — drive time & availability.

Typical Spring → Katy run is ~50–65 min via Beltway 8 and the Grand Parkway. If a tech is already west of Houston we can often route through Katy the same shift.

Same-day calls are routed when our schedule allows. If a tech is already in your corridor we can often re-route the same shift. We never promise a hard SLA we can’t back — but we’ll tell you on the phone what the realistic window looks like before we roll a truck.

Time-and-a-half applies for evenings, weekends, and extended hours.

Industrial base

Katy’s industrial context.

Katy's industrial base wraps the Grand Parkway corridor and the Energy Corridor's western edge: metal-building manufacturers strung along I-10 West, oilfield-services packaging and fab work in Cane Island and Pin Oak, and a steady set of machine shops servicing the energy upstream chain. Our trips out are usually one of these three.

The difference

Why Katy owners choose Saw Service 3G.

Authorized Hyd-Mech dealer

Factory authorization gives us direct OEM parts access, current technical bulletins, and the engineering documentation we need to set a saw to spec — not approximate it.

25 years, third generation

Saw Service 3G is the third generation of one Greater Houston metals family. Your saw has probably already been serviced by us — or by Kaylen's father.

We come to you

Fully mobile. Your saw stays bolted to your floor; our truck shows up. 100-mile primary radius with surrounding-state coverage for larger jobs.

Billed after the saw cuts square

Verified test cut before we leave. Invoice goes out after the work is done right — Net 30 ACH or check.

Common questions

Katy band saw repair — FAQ.

How long does it take you to reach Katy from Spring?
Typically 50–65 min via Beltway 8 and the Grand Parkway. These are typical drive times based on midday traffic — peak hours can push it longer.
Which Katy facilities do you already service?
Oilfield-services packaging shops, metal-building manufacturers, and machine shops across Grand Pkwy and I-10W. Specific customer references available on request (with their permission).
Do you do emergency calls in Katy?
Yes — same-day when possible. If a tech is already in West Houston we can often route through Katy the same shift.
Is Katy inside your primary service area?
Yes. Katy sits well inside the 100-mile primary radius from our Spring shop.

More service-area pages

Other cities we serve.

The 100-mile primary radius covers the entire Greater Houston area. Each city below has its own service-area page.

Next step

Get a quote for Katy.

Phone is fastest. Tell us the brand, the model, what the saw is doing, and your Katy address — we’ll quote the visit and the work before we roll.

Call (281) 704-5589

Request a Quote