25 Years · 3rd Generation · Authorized Hyd-Mech Dealer
We come to you.
Any saw. Any shop.
Mobile industrial band saw repair, anchoring, relocation, and preventive maintenance — for metal fabrication shops, machine shops, and steel service centers across the Greater Houston Area and surrounding states. Billed after the work is done right.
0 yrs
In the saw business
Since 2001
0rd
Generation family-owned
3G — three generations
0+
Industrial accounts
Steel, fab, CNC
0%
Mobile / on-site
We come to you
What we do
Service that finds you,
not the other way around.
Mobile, on-site work across the saw's full lifecycle — from anchoring and relocation to emergency repair, billed only after the job is verified done.
Anchor
Set, level, and anchor band saws to spec. Concrete prep, leveling, alignment, and power-up so the machine runs true and stays true.
Disassemble & Relocate
Tear-down, transport, and re-anchor across plants or sites. Documented for warranty, calibrated on the other end.
Mechanical, Hydraulic & Electrical Repair
Drive systems, blade tracking, hydraulics, controls, sensors. We diagnose on-site and get the saw cutting again.
Preventive Maintenance Programs
Scheduled inspections that catch wear before it becomes downtime. Tracked, reported, and tailored to your duty cycle.
Metal Fabrication Saw Service
Service tuned to fab-shop realities: long runs, mixed alloys, structural stock. Keep your throughput predictable.
Cutting Saw Service
All-around cutting saw maintenance and repair across brands, drives, and blade types.
Emergency / Urgent Response
Saw down? We come early, stay late. Fast on-site response across Greater Houston and surrounding states.
How it works
Four steps. Zero guesswork.
Every job follows the same disciplined arc. We diagnose on-site before we touch a wrench, document the work, and bill after we’ve verified it.
Call
One phone call. Tell us the saw, the symptom, the urgency. We schedule fast.
Diagnose On-Site
We come to your facility, inspect the machine, and confirm the work needed before we start.
Repair
Mechanical, hydraulic, electrical — handled by techs who've seen these machines for 25 years.
Verify & Bill
We test, document, and walk you through the work. Invoice after the job is done right.
Brands serviced
25 years of saws. All brands. All shops.
Authorized Hyd-Mech Dealer
Three generations on the saws
Family-owned. Saw-floor raised.
The "3G" stands for three generations — going back to DoAll Dave, Kaylen's father · 2nd generation. Saw Service 3G carries that 25-year body of work forward.
Owner · 3rd Generation
Kaylen
Grew up around band saws — his father, known across the Greater Houston metals industry as 'DoAll Dave,' serviced most of the saws our customers still run today. Kaylen joined the family business in 2019 and took it over in 2024. Saw Service 3G carries that work forward into the third generation.
Service Lead
Mason
Texas A&M graduate in Technology Management. Joined Kaylen after graduation and has been on the trucks ever since. Most memorable repair: replacing the head linear bearings and rails on a CTB400. Best friends with Kaylen for 25 years — a 2-man band that runs like a tight crew.
The legacy
People in the Greater Houston metals industry know “DoAll Dave” — Kaylen’s father — because he’s serviced most of the saws our customers still run today. Saw Service 3G is the third generation keeping that work going, one shop floor at a time.
In their words
Customer testimonials
“Hey brother, I really appreciate you and Mason — you guys are a work of art. Thank you so much.”
Coverage
Houston-based. Multi-state on call.
Our trucks roll out of the Greater Houston Area and serve customers across Texas plus surrounding states. If your facility runs an industrial saw, we can probably get to it.
TX
Texas
LA
Louisiana
OK
Oklahoma
AR
Arkansas
NM
New Mexico
MS
Mississippi
Greater Houston cities served
- Houston ·
- Sugar Land ·
- Pasadena ·
- Pearland ·
- The Woodlands ·
- Conroe ·
- Baytown ·
- Texas City ·
- Galveston ·
- League City ·
- Beaumont ·
- Port Arthur ·
- Katy ·
- Cypress ·
- Spring ·
- Tomball ·
- Humble ·
- Channelview ·
- Deer Park ·
- La Porte ·
- Stafford ·
- Missouri City
— and surrounding metros
Why Saw Service 3G
Built around the way shops actually run.
3rd Generation
25 years and three generations on the same band saws. Kaylen, Mason, and the legacy of “DoAll Dave” behind every job.
Authorized Hyd-Mech Dealer
Factory-backed for Hyd-Mech parts, service, and warranty work. Plus deep expertise across Marvel, HEM, Amada, Behringer, and more.
Mobile / On-Site
We come to you. 100-mile primary radius from Spring, TX — and we’ll travel farther for the right customer.
Billed After Service
Hourly with a 2–3 hour minimum plus travel. Quoted up front, invoiced after the work is verified done. Net 30 ACH.
From the field
Real shops. Real saws. Real work.
Not stock photos. These are jobs from across our service area — on-site, in-shop, in the middle of the work.
On-site service — Greater Houston
01 / 12
Watch us work
In the field. In real time.
A short clip from a recent on-site service. The kind of work we do, the way we do it.
Recorded on-site · Sound on for full effect
Saw down?
We come early.
We stay late.
When a saw goes down and a line is waiting, the cost is in minutes, not hours. Call us — we’ll roll as fast as we can.
Mon – Fri · 8:00 AM – 5:00 PM · Come-early / stay-late and weekends available — time-and-a-half for extended hours and weekend calls
Get a quote
Tell us about the saw.
We’ll take it from there.
Fill out the form and we’ll respond fast with next steps. Prefer to talk? Call (281) 704-5589.
What we’ll need to know
Brand & model · the symptom · location · how urgent it is.
What happens next
We confirm details by phone, schedule a visit, and quote on-site before any work.
Billing
Invoiced after the work is verified done — no surprises.
Common questions
Questions our customers ask before they call.
If you don’t see your question, just call. We’d rather talk to you about your saw than read another form.